Low and Medium Voltage Electrical Panels | MCK Energia | São Paulo | Brazil
Inductive Loop
An inductive loop is a rectangular, square, or round magnetic wire installed within the pavement to detect the metal mass of a vehicle. The wire's ends are connected to a detector module. The detector module monitors to determine if a vehicle is in the loop area.
Advantages:
Protects the vehicle when it is on the loop, preventing the gate from closing on top;
Automatically closes the gate after the vehicle passes;
Detects the actual presence of the vehicle in front of a card reader;
It can be used as a meter to indicate the capacity of the parking lot.
The inductive loop is widely used for:
Opening and closing sliding gates;
Opening and closing access barriers in parking lots;
Access at gates with traffic lights
Features
High precision;
Sensitivity adjustment;
Very low maintenance.
This equipment detects the vehicle's metal mass in front of a card reader.
Specifications
Loop Cable
Loop cable copper cross-section: 1.5 or 2.5 mm²,
Cable size (outer diameter): 6 to 8 mm,
Operating temperature: -35°C to + 85°C,
Insulation: > 400V,
Insulating materials: cross-linked elastomer.
Loop Return Cable
Conductor cross-section: 1.34 mm²
Shielding: tinned copper,
Number of twists per meter: 10 to 20
Outer diameter: 8mm
Products manufactured by MCK Metal can be purchased in up to 48 installments, using the BNDES card or through special financing conditions through FINAME .
